SMD Rework Station

850 ESD is a hot air rework station with 270 W heating power, temperature range from 100Â degree celsius to 450Â degree celsius, air volume 2264, 24 L/min. Features: PID controlled closed loop of sensor, rapid heating, precise and stable temperature. Suitable for soldering and disordering surface mounted with ICs, such as QFP, PLCC, SOP, BGA etc. Intelligent cooling system, deferred air delivery when unit is off, auto power off when temperature drops below 100Â degree Celsius. Low vibration, free noise. ESD protection.

Established in the year 2012, We are Manufacturer, Exporter, Trader and Importer of Maxxx Pamma Iron Stand, SMD Rework Station, Sunshine Quick, Bakku Rework Station, Soldering Iron, Power Supply, Component Cleaner, Woksten Socket etc.

Details:

3 In One - SMD + Soldering Iron + Battery Booster

Applicable for a rework of mobile screen cover. BGA, SMD and all type chip components other electronic components

Suitable for soldering and disordering surface mounted with ICs, such as QFP, PLCC, SOP, BGA etc.

PID controlled closed loop of sensor, rapid heating, precise and stable temperature Intelligent cooling system

eferred air delivery when unit is off, auto power off when temperature drops below 100 Celsius Low vibration, free noise, ESD protection

Only laptop, desktop motherboard, mobile repair smd motherboard, mobile, smd soldering and repair esd is a hot air rework station with 270 w heating power, temperature range from 100 degree Celsius to 500 degree Celsius

KADA 2018D+ SMD Rework Station With Soldering iron Station One Machine 2 FeatureProduct Features :-
Display Type: microcomputer LCD display
Input voltage: AC220V / 110V/+-/10% 50HZ / 60HZ
Temperature range: hot air gun 100-480 degrees Celsius, soldering station 200-480 degrees Celsius
Display form: LCD screen
Machine power: 680W
Airflow type: brushless fan soft wind
Soldering station power: 75W
Air volume: 120 l / min (maximum)
Features: Integrated on-hook sleep function, integrated air gun three-speed temperature memory, mobile phone charging function.
CH1, CH2, CH3 are the three-speed temperature storage of the heat gun, which can store three different temperature values ??conveniently and quickly.
USB mobile phone charging interface
Operating instruction :-
Boot: connect the handle, turn on the power to turn on the power switch, the display shows the factory set temperature value (hot air gun 100C, the largest air volume, soldering station 200 ? C)
temperature/air volume setting: adjust the knob to set the desired temperature value, hot air gun air volume adjustment must press the adjustment knob to convert. CH1, CH2, CH3 are temperature memory keys. First, adjust the required temperature and air volume and then press and hold the memory key. When you hear a long ring, it means that the memory has been completed. Three memory keys record three different temperatures/air volumes.
This product integrates a USB mobile phone charging function, or can be used for mini table lamp power supply output, can output more than 1A current. The USB port is on the back panel of the machine. It is convenient and quick to take up space and other features.
Before closing the system, please put the handle into the bracket. At this time, the system will automatically cool down to enter the standby state. After entering the standby state, the system power can be turned off, except for the soldering station. This operation extends the life of the heating element.
include in Package :-
1 x Host
1 x Soldering Iron
1 x Hot Air Gun
1 x Soldering Iron Hoder

Details:

Suitable for soldering and disordering surface mounted with ICs, such as QFP, PLCC, SOP, BGA etc.

PID controlled closed loop of sensor, rapid heating, precise and stable temperature

Intelligent cooling system, deferred air delivery when unit is off, auto power off when temperature drops below 100 Celsius

Low vibration, free noise, ESD protection

Note: Please ensure to keep Air level above zero

Details:

Rework station works immediately when the handle is picked up and enters standby mode when the handle is placed in the holder.

The Maxx Pamma 850A is facilitated with an automatic cooling function.

Prolonging the life time of heating element, protecting the unit.

High temperature and airflow adjustment range. Extremely short air heating up time. The air cools down the heating element continuously after use and therefore increases the lifetime of the heating element.

Details:

It combines together in one common unit: soldering pen, rework station and Battery booster, these three functions can be used independently or simultaneously.

Auto Cool Down Safety Feature

Battery booster: 0-12V

Maxx Pamma Good Quality

Description:

• Original Quick Smd Rework Station
• Brushless Fan
• 3 In 1 Rework Station, Bga Rework Station + Soldering Iron+Battery Booster
• With Long Life Air Blower
• Best In Class

Description:

• Original Bakku Smd Rework Station
• Brushless Fan
• 3 In 1 Rework Station, Bga Rework Station + Soldering Iron+Battery Booster
• With Long Life Air Blower
• Power Consumption 460W
• Temperature Range Is 100 Degree C To 420 Degree C
• Micro Dc Soldering Pen-12V
• Battery Booster Works From 1.5V-12V
• Best In Class